Flat Roof
Select this for a flat or nearly flat roof finished with a continuous membrane such as EPDM, bitumen, or PVC.
Sale
Sale
Whole House Fan EPS Zone Model, 1,400 CFM Designed for Homes 500-1200 sqft
$1,413.12
$595.00
Choosing Your Roof Tile Type
Choose the option that matches the shape of the tiles or slate at the planned installation point.
High Profile Tile
Select this for pantiles, S-shaped tiles, or other raised and wavy clay or concrete tiles with noticeable ridges and troughs.
Flat Tile or Slate
Select this for flat interlocking tiles, plain tiles, or natural slate that creates a relatively even roof surface.
EPS Zone · Whole House Fan · 500–1,200 sq. ft. homes
Targeted fresh-air cooling for smaller homes and living zones.
The Solatube EPS Zone draws cooler outdoor air through open windows and moves accumulated indoor heat into the attic, where it exits through the home's attic vents.
Its EC brushless motor, seven variable speeds, insulated ducting, and HushMount™ 2 system deliver controlled airflow for smaller homes or selected zones within a larger home.
- 1,400 maximum CFM
- Seven variable speeds
- Comfort Control Remote included
Plan before ordering: EPS Zone requires approximately 2 sq. ft. of net-free attic ventilation, adequate attic space for the fan and duct path, accessible electrical power, and open windows during operation.
Comfort on your terms
Exchange trapped indoor heat for fresh outdoor air
Use the EPS Zone when outdoor conditions are cooler than the air inside your home to improve comfort and reduce reliance on air conditioning.
Focused airflow
Moves up to 1,400 CFM through smaller homes or selected living zones and helps release heat accumulated during the day.
Seven-speed control
Choose lower airflow for everyday ventilation or increase the speed when you want a faster air exchange.
Remote operation
The included Comfort Control Remote lets you turn the fan on and adjust airflow without accessing the attic.
Efficient EC motor
The brushless motor and Soft Start technology provide efficient operation and a smooth ramp to the selected speed.
Reduced vibration
HushMount™ 2, Jet Blade design, and insulated ducting work together to reduce transmitted sound and vibration.
Clean ceiling finish
The fastener-free intake grille provides a finished appearance and removes easily for sink or dishwasher cleaning.
Engineered Performance Series
Power, insulation, and control in one system
- EC brushless motor with Soft Start technology
- Jet Blade fan design for high airflow
- HushMount™ 2 vibration-isolation assembly
- Seven-foot insulated duct
- R6 insulated damper doors
- Removable, dishwasher-safe ceiling grille
A complete air exchange
How a whole house fan cools and ventilates
- Open selected windows. Use the system when outdoor air is cooler than the indoor air.
- Turn on the fan. The ceiling intake draws fresh outdoor air through the living space.
- Release trapped heat. Warm indoor air moves into the attic and exits through properly sized attic vents.
A whole house fan depends on open windows and adequate attic exhaust ventilation. It does not refrigerate or dehumidify the air like an air conditioner.
Choose the right capacity
Compare Engineered Performance Series models
Select a fan using the home's size, required airflow, available attic space, and net-free attic ventilation.
| Model | Suggested home size | Maximum airflow | Attic venting required | Sound, low/high |
|---|---|---|---|---|
| EPS Focus | 0–500 sq. ft. | 259 CFM | 1 sq. ft. | 30 dB |
| EPS Zone Current model | 500–1,200 sq. ft. | 1,400 CFM | 2 sq. ft. | 40/48 dB |
| EPS Plus | 1,000–2,200 sq. ft. | 2,502 CFM | 4 sq. ft. | 44/58 dB |
| EPS Ultra | 2,000–3,200 sq. ft. | 3,785 CFM | 6 sq. ft. | 50/58 dB |
| EPS Extreme | 3,000+ sq. ft. | 4,567 CFM | 8 sq. ft. | 58/64 dB |
Home size is a starting point. Confirm the fan capacity, attic venting, attic clearances, climate, and local requirements for the specific installation.
EPS Zone system
What's in the box
The EPS Zone system ships in two boxes with the fan, airflow, mounting, control, and ceiling-finish components needed for installation.
- EPS Zone fan assembly with EC brushless motor
- Fan transition
- Seven-foot insulated ducting
- R6 damper box
- Fastener-free ceiling grille
- HushMount™ 2 assembly
- Fastener kit
- Variable-speed Comfort Control Remote
- Installation instructions
Plan for installation supplies: confirm all required mounting, sealing, electrical, and code-required materials before beginning installation.
Plan the installation
Confirm attic space, ventilation, and electrical access
Before installation, confirm that the attic can accommodate the fan assembly and seven-foot duct path and that the home provides adequate net-free attic ventilation.
- Approximately 2 sq. ft. of net-free attic vent area
- Accessible 120V power near the fan location
- 15.5 × 21.5-inch intake grille
- 14-inch-diameter, seven-foot insulated duct
- Clear duct path without sharp bends or restrictions
- Electrical connections performed by a licensed electrician
See the system in action
Whole house fan overview
See how a Solatube whole house fan exchanges warm indoor air for fresh outdoor air.
Warranty
Solatube damper box, ducting, and fan housing are covered for 10 years. Motor and electrical components are covered for 5 years, and the remote is subject to its manufacturer's warranty. Review the complete Solatube warranty for terms, exclusions, and claim instructions.
Related Products
-
Sale
-
Sale
Whole House Fan EPS Extreme - Designed for 3000 - 7000 sqft Homes, 4567 CFM
$2,989.29 $1,030.00
Reviews
-
The fan itself is very quiet and creates a great breeze to cool off our house at night.
-
Solatube gave us the best price compared to other estimates.Very happy with the way it looks and operates. Highly recommend them
-
Thank you Solatube!! We have 2 solatubes installed by this company over 10 years ago, and it is the best investment for light you don’t need electric to run!
Write a Review
